Console luminaire with affordable price and high reliability for small spaces

The new form anti-corrosion case reliably protects the model from overheating or overcooling. In addition, the ice-luminaire has an extended range of operating voltage (90–305 V) and is suitable for use in an area with an unstable power supply. The kit includes an adapter that allows you to install the model on brackets with a diameter of 38–65 mm.

Advantages of the GLOBAL STREET 30 Watt Console Ice Lamp

The company's engineers adapted the model for domestic use on the street. It is optimal when an inexpensive and reliable light source is needed to illuminate a single-lane road, a local area and other spaces of a small area.
Reliability: 30,000 hours service life and 3 years warranty
The new led-lamp has been tested at the Maxus Laboratory. The study showed that during operation the driver and LEDs do not overheat. This allows you to be confident in the quality and give a guarantee lasting 3 years. The resource of the GST-0350-01 model is 30,000 hours, it will last more than 10 years if you include the model for 8 hours daily.

Corrosion-resistant housing with protection against overheating and overcooling

The housing of the new spotlight is made of an alloy based on aluminum and has the form of a radiator type. Thanks to this engineering solution, the temperature is evenly distributed over the entire area, so the Global console lamp is well protected from overheating or overcooling. The housing is not susceptible to rust. And the neutral gray color of the lampshade will not attract too much attention on the facade or in the urban environment.

Easy installation: without buying additional hardware and adapters

Use the new GLOBAL STREET ice spotlight to save time and money on the purchase or manufacture of fasteners or adapters. The model is equipped with an adapter that allows you to install the lamp on brackets with a diameter of 38 to 65 mm, including the common types of pipes 48 and 62 mm.
Extended operating voltage range - 90–305 V
Choose a new lamp to keep the streets safe and comfortable, regardless of the stability of the mains. The model is perfectly adapted for the conditions of villages and other territories where surges or under voltages are often observed. In addition, a wide range will protect the lamp from burnout due to power surges.
The new model GST-0350-01 gives a comfortable light and can be installed on the street where people are often

High-quality light: no flicker with realistic color reproduction

The searchlight gives uniform lighting that does not pulsate and correctly conveys the natural shades of objects. Such a light is comfortable for the eyes and does not create an additional load on the eyesight; it is suitable for roads, pedestrian areas, areas near shops, parks and other areas where people often visit.

Protected from lightning and wind, adapted to the weather of Ukraine

The lamp is resistant to strong winds, has lightning protection up to 2.5 kW. The model works reliably in the temperature range from −40 to +50 ° С and is well suited for outdoor use in a temperate climate.

IP65

The cantilever lamp is protected from strong jets of water and dust, so it can be installed outdoors without a canopy or used in dusty rooms.

Energy saving

The energy efficiency of the new LED model is 100 lm / W, which means it will make streets and roads safe and save money.

Where is it convenient to use the new model?

The lamp is well suited for small areas, it is convenient to install at a height of 2 to 9 meters. The model can be used for lighting:
  • single-lane roads, yards;
  • sidewalks and other pedestrian areas;
  • territories near production and workshops;
  • parks and squares;
  • yards of private houses;
  • parking and gas stations;
  • other spaces.
Console light can be mounted on brackets of different diameters

How to install the lamp GST-0350-01?

Attention! Remember that work should only be carried out by specialists.
1. Turn off the power before starting work.
2. Loosen the fixing screws, insert the bracket or other construction to be mounted into the mounting hole, and install the model in the desired position.
Tip. If the diameter of the bracket is more than 38 mm, use an adapter.
3. Secure the model with screws.
4. Connect the device to the network. Turn on the power and make sure everything is working correctly.
You can buy a new lamp in the catalog of our store. For the convenience of customers, we offer:
  • delivery;
  • different types of payment;
  • expert advice;
  • free lighting calculation;

Comments

Popular posts from this blog

LED Street Lights - A Way to Save Your Money

Interior lighting design: how to organize comfortable and effective lighting

Deepika Padukone, Priyanka Chopra and 5 female Bollywood entertainers who are prepared in combative techniques